CNC Machine Park | Mazak, Haas

The interactive demonstrations on this site need JavaScript and are not shown. No information is lost: every figure and explanation is written out in the text below each section.

Turning Ø500 mm
5-axis milling Ø500 × 320 mm
Sawing Ø560 mm
Wire EDM 500 mm

How deep the machine park runs

Not “we have a big lathe”, but how many machines can actually take a part of a given diameter. A part that fits one machine depends on that machine; one that fits six has a different delivery security. Move the slider and see how many remain.

Part diameter [mm]

Machines that can take it
Public machining ceiling: Ø500 mm

The diameters are the publishable ones, after the catalogue figures have been corrected. Usable length is published for only some of the machines; for the rest it is confirmed on enquiry.

Why depth matters more than the peak

A park’s maximum figure says what was possible once. The number of machines covering your part’s diameter says what is possible when one of them is in service or tied up on another batch. The second question is the one that decides a delivery date.

Why the chart stops at the ceiling

One machine in the park takes more than the public ceiling, but the figure shown stays the public one. Anything beyond the ceiling is discussed per part, not promised on a website.

No published envelope

These machines have no envelope in our data. They are left out of the chart not because they are smaller, but because we do not have the figure — and a missing figure is not estimated.

Mazak Quick Turn 400ML Smooth G · Haas VF-2 · Proth PSGS 50100AHR · Novick AR65-MA · Two HOKER furnaces · ZEISS CONTURA · TESA MICRO-HITE 3D

Process

Equipment

X travel: 730 mm
Y travel: 450 mm
Z travel: 470 mm
Table diameter: 500 mm
Max workpiece diameter: 500 mm
Max workpiece height: 320 mm
Max workpiece weight: 200 kg
B-axis: ±110 (220 total) °
C-axis: 360 °
Indexing accuracy: 0.0001 °
Max spindle speed: 12,000 (18,000 optional) rpm
Spindle power: 18.5 peak / 11 continuous kW
Spindle taper: HSK-A63 / BT40
Tool magazine: 30 standard / 48
Rapid traverse: 36 m/min
Control: Mazatrol SmoothX
Built in: Worcester, UK

Simultaneous 5-axis vertical machining center. A Ø500 mm trunnion table supported at both ends, for complex parts machined in a single setup.

Simultaneous five-axis vertical machining centre for complex geometries and three-dimensional surfaces. The tilting rotary table gives the tool access to several faces of the part in one setup, which removes repositioning errors and shortens the cycle. The Mazatrol SmoothX control supports programming, simulation and path control. Suited to precision components for energy, automotive, medical and machine building.

Catalogue figure, confirmed on the machine. Specifications published by the manufacturer.

Swing over bed: ~845 mm·
Bar capacity: ~184 mm·
Chuck size: 18 ″·
Spindle power: 37 kW·
Max spindle speed: 2,000 rpm·
Turret stations: 12·

One catalogue figure exceeds the public machining ceiling and is not shown. Parts above the ceiling are discussed on the drawing.

The largest CNC lathe in the park, for large-diameter parts and heavy bar stock.

High-capacity three-axis CNC turning centre for heavy parts and large diameters. A rigid structure and a main spindle of high power and torque allow intensive roughing as well as accurate finishing. It suits shafts, flanges, rollers, bushes and components used in energy and plant construction, including long or bulky parts.

Indicative figure, per catalogue documentation. Specifications from catalogue documentation; confirmed against the machine nameplate before quotation.

The capability we publish stops at Ø500 mm. This machine’s catalogue documentation indicates a larger diameter, but we do not promise beyond the verified ceiling. For larger parts, let us discuss the project.

to be confirmed The exact variant (M / MY) and whether it has live tooling and a Y axis.

Swing over bed: ~678 mm·
Max turning diameter: ~420 mm·
Bar capacity: ~102 mm·
Chuck size: 12 ″·
Spindle power: 30 kW·
Y-axis travel: ~150 mm·
Turret stations: 12·

CNC lathe with live tooling and a Y-axis: turning, milling and off-center drilling in one setup.

Four-axis CNC turning centre for medium and large parts. Driven tools, C axis and Y axis allow turning and milling, off-centre features included, in a single setup. The rigidity of the assembly and the main spindle power cover both roughing and accurate finishing of shafts, flanges, bushes and other rotational components.

Indicative figure, per catalogue documentation. Specifications from catalogue documentation; confirmed against the machine nameplate before quotation.

Swing over bed: ~750 mm·
Max turning diameter: ~420 mm·
Bar capacity: ~77 mm·
Chuck size: 12 ″·
Spindle power: 26 kW·
Max spindle speed: 4,000 rpm·
Turret stations: 12·

CNC lathe with live tooling for milling and drilling integrated into the turning cycle.

Three-axis CNC turning centre for medium and large parts. The M configuration, with driven tools and C axis, integrates turning, drilling, tapping and milling. The rigidity of the machine gives stability in roughing as well as finishing, and CNC programming holds repeatability across batches of different sizes: shafts, flanges, bushes and components with face or radial features.

Indicative figure, per catalogue documentation. Specifications from catalogue documentation; confirmed against the machine nameplate before quotation.

to be confirmed MODEL AMBIGUITY: QTN-300M (12″ chuck, live tooling, 12-station turret) versus the older QT-300 (10″ chuck, 30 hp, 16-station turret, no live tooling). To be confirmed before publication.

Swing over bed: 762 mm
Max turning diameter: ~413–432 mm·
Max turning length: ~864 mm·
Bar capacity: 76 mm·
Chuck size: 254 (10″) mm·
Spindle power: 22.4 kW·
Max spindle speed: 3,400 rpm·
Turret stations: 12·

Rugged CNC lathe for medium-sized parts and long turning lengths.

Robust CNC turning centre for medium and large parts. It performs external and internal turning, profiling, grooving, drilling and threading with high accuracy and repeatability. A powerful main spindle and an automatic turret suit it to steels, non-ferrous alloys and other engineering materials: shafts, flanges, bushes and rotational components, one-off or in series.

Indicative figure, per catalogue documentation. Specifications from catalogue documentation; confirmed against the machine nameplate before quotation.

to be confirmed Standard variant, or the “Big Bore” / long-bed version (distance between centres ≈991 mm)?

Swing over bed: ~673 mm·
Max turning diameter: ~375 mm·
Bar capacity: ~77 mm·
Chuck size: 10 ″·
Spindle power: 26 kW·
Max spindle speed: 4,000 rpm·
Turret stations: 12·

CNC lathe with live tooling, used for medium-series precision components.

Three-axis CNC turning centre of the Nexus II generation, with driven tools and C axis. It combines turning, drilling, tapping and milling, reducing the number of setups and the need to move the part to other machines. A rigid build and the Mazatrol control support accurate machining of medium parts, in series or in mixed batches.

Indicative figure, per catalogue documentation. Specifications from catalogue documentation; confirmed against the machine nameplate before quotation.

Swing over bed: ~610 mm·
Max turning diameter: ~350 mm·
Bar capacity: ~65 mm·
Chuck size: 8 ″·
Max spindle speed: 5,000 rpm·
Turret stations: 12·

Compact CNC lathe with live tooling, for small and medium bar-fed parts.

Three-axis CNC turning centre for small and medium parts. The M configuration adds driven tools and C-axis control, so turning combines with drilling, tapping and milling in a single setup. That integration removes transfers between machines and improves the accuracy between the machined features.

Indicative figure, per catalogue documentation. Specifications from catalogue documentation; confirmed against the machine nameplate before quotation.

Swing over bed: ~610 mm·
Max turning diameter: ~350 mm·
Bar capacity: ~65 mm·
Chuck size: 8 ″·
Y-axis travel: ~100 mm·
Turret stations: 12·

The Y-axis version of the QT-200: off-center milling and drilling without a second setup.

Four-axis CNC turning centre with driven tools, C axis and Y axis. Besides ordinary turning it produces off-centre holes and milled features, slots, flats and contours that do not lie on the part axis. Complete machining in one setup raises geometric accuracy and shortens the route.

Indicative figure, per catalogue documentation. Specifications from catalogue documentation; confirmed against the machine nameplate before quotation.

Swing over bed: ~580–680 mm·
Max turning diameter: ~330 mm·
Bar capacity: ~51 mm·
Turret stations: 12·

Compact CNC lathe for small bar-fed parts in repeat series.

Compact, fast three-axis CNC turning centre for small and medium parts. Driven tools and the C axis allow drilling, tapping and milling alongside turning. It suits repetitive production of components with varied geometry, with short cycle times and good dimensional accuracy; integrated machining reduces the number of operations and setups.

Indicative figure, per catalogue documentation. Specifications from catalogue documentation; confirmed against the machine nameplate before quotation.

to be confirmed Spindle power and chuck size could not be verified. The exact generation of the machine.

Swing over bed: ~548 mm·
Max turning diameter: ~280 mm·
Bar capacity: ~51 mm·
Chuck size: 6 ″·
Spindle power: 7.5 / 11 kW·
Max spindle speed: 6,000 rpm·
Turret stations: 12·

The smallest CNC lathe in the park, high-speed, for small precision components.

Compact three-axis CNC turning centre for small components. Driven tools and C-axis control make turning, drilling, tapping and milling possible within the same cycle. Working speed, short positioning times and repeatability recommend it for series production of small, complex parts.

Indicative figure, per catalogue documentation. Specifications from catalogue documentation; confirmed against the machine nameplate before quotation.

Spindle bore: ~132 mm·
Spindle power: 37 kW·
Turret stations: 12·
Control: Mazatrol SmoothG

Large-bore, long-bed CNC lathe with live tooling, for long bar-fed components.

Three-axis CNC turning centre in the long-bed version, for large parts and long shafts. Driven tools and the C axis allow turning together with drilling, tapping and milling. The Mazatrol SmoothG control offers conversational programming, simulation and close process control, for heavy machining that holds accuracy over long lengths.

Indicative figure, per catalogue documentation. Specifications from catalogue documentation; confirmed against the machine nameplate before quotation.

to be confirmed The actual turning length (long-bed variant) and the maximum turning diameter.

X travel: 762 mm
Y travel: 406 mm
Z travel: 508 mm
Table size: 914 × 356 mm
Max table load: 1,361 kg
Max spindle speed: 8,100 rpm
Spindle power: 22.4 kW
Spindle taper: CAT40
Tool magazine: 20
Tool-to-tool time: 4.2 s
Rapid traverse: 25.4 m/min

3-axis vertical machining center for prismatic parts, fixtures and series components.

Compact, versatile vertical machining centre for milling, drilling, boring and tapping. Three controlled axes cover prismatic parts, housings, plates and components of complex geometry. The automatic tool changer and CNC programming cut idle time and hold repeatability from part to part, for prototypes and small batches as well as series production.

Catalogue figure, confirmed on the machine. Specifications published by the manufacturer.

to be confirmed Taking the official Haas positioning and repeatability figures from the datasheet.

Grinding capacity: 500 × 1,000 mm·
Table travel: 560 × 1,150 mm·
Motor power: 7.5 kW·
Control: Proth AD1·

Surface grinder with magnetic chuck, for precision surfaces and hardened parts.

Surface grinding machine with hydraulic control and feeds, for precision finishing of flat surfaces. A work table in the 500 × 1000 mm class takes medium and large parts. It is used for close dimensional tolerances, flatness, parallelism and low roughness: plates, guideways, die components, fixtures and other parts that need precise finishing after milling or heat treatment.

Indicative figure, per catalogue documentation. Specifications from catalogue documentation; confirmed against the machine nameplate before quotation.

to be confirmed The exact model of the surface grinder: the client description says PSGS 50100AHR, the earlier data said PSGC-50100AHR, from a dealer listing. To be confirmed against the machine plate — one letter changes the model.

Table size: 920 × 620 mm
X/Y travel: 650 × 500 mm
Max cutting thickness: 500 mm
Taper angle: ±10° / 80 mm
Positioning accuracy: 0.010 mm
Repeatability: 0.005 mm
Achievable surface finish: Ra 0.8 µm

Wire EDM for complex contours, keyways and hardened parts that cannot be cut conventionally.

CNC wire EDM machine with reciprocating wire, for high-precision cutting of electrically conductive materials whatever their hardness. The process makes no mechanical contact, so complex contours, narrow slots, small radii and shapes hard to obtain by cutting become possible. It suits dies, punches, gauges, fixtures and precision components; CNC control holds path repeatability and keeps mechanical load on the part low.

Catalogue figure, confirmed on the machine. Specifications published by the manufacturer.

to be confirmed Confirmation that the machine on site is the AR65-MA variant.

Cutting capacity, round: 560 mm
Cutting capacity, rectangular: 560 × 560 mm
Blade speed: 20–100 m/min

Dual-column bandsaw for cutting bar stock and sections up to 560 mm.

Semi-automatic twin-column industrial band saw for 0° cutting of bars, tubes, profiles and heavy blanks. Hydraulic clamping on both sides of the blade, stepless speed control and chip removal deliver stable, accurate cuts with little burr. Its robust build suits it to preparing material ahead of machining.

Catalogue figure, confirmed on the machine. Specifications published by the manufacturer.

Cutting capacity, round: 500 mm
Cutting capacity, rectangular: 500 × 750 mm·
Blade size: 6,040 × 54 mm
Motor power: ~7.5 kW·

Semi-automatic dual-column bandsaw with PLC control and automatic hydraulic blade tensioning.

Semi-automatic industrial band saw with a rigid twin-column structure, for accurate cutting of large metal blanks. It handles bars and workpieces of round, square or rectangular section. Hydraulic vices and blade tensioning, sturdy guides and adjustable cutting speed give stability, repeatability and low vibration.

Catalogue figure, confirmed on the machine. Specifications published by the manufacturer.

Temperature range: ~550–650 °C·

In-house stress relieving between roughing and finishing operations, for the dimensional stability of the finished part.

Industrial furnaces for controlled heating and heat treatment of parts and blanks: annealing, stress relieving, normalising, hardening or tempering, according to material and thermal cycle. Temperature control and uniform holding inside the chamber support the intended mechanical and structural properties. Two units mean batches can be organised more flexibly and the flow stays continuous.

Indicative figure, per catalogue documentation. Make and model could not be verified. The unit is described generically until the client confirms.

to be confirmed The manufacturer, model, usable hearth dimensions and actual temperature range of the two furnaces.

Description and park composition confirmed by METALPET. Envelope figures are confirmed against the machine plate before quoting.

Coordinate measuring machine for incoming, in-process and final inspection, with repeatable measuring programmes.

Three-dimensional coordinate measuring machine for accurate checking of dimensions and geometry: points, diameters, distances, angles, positions, flatness, perpendicularity and other geometrical characteristics. By comparing results against the drawing or the CAD model it supports incoming inspection, intermediate checks and final inspection. Measuring programmes bring traceability and repeatability.

Confirmed by METALPET. Description and park composition confirmed by METALPET. Envelope figures are confirmed against the machine plate before quoting.

to be confirmed The measuring volume and probe type of the ZEISS CONTURA. Make and model are confirmed by the client; the figures have not been supplied yet.

Description and park composition confirmed by METALPET. Envelope figures are confirmed against the machine plate before quoting.

Coordinate measuring machine for quick checks near the shop floor: validating parts and setting up processes.

Three-dimensional coordinate measuring machine for quick, accurate checking of parts in the inspection area or close to production. It determines dimensions, positions and geometrical deviations by probing part features along the three axes. The operating interface makes both single measurements and repeated inspection sequences straightforward: releasing parts, setting up processes and confirming conformity.

Confirmed by METALPET. Description and park composition confirmed by METALPET. Envelope figures are confirmed against the machine plate before quoting.

to be confirmed The measuring volume of the TESA MICRO-HITE 3D. Make and model are confirmed by the client.

The park comprises 20 machines, according to the description supplied by METALPET. The categories and their counts are listed below, machine by machine.

The descriptions give the general functions and capabilities of the models. Exact parameters can vary with the year of manufacture, the machining length and how each machine is equipped.

What we are still confirming

We would rather say what we have not yet verified than publish a figure an engineer finds wrong on the first visit.

01 Mazak Quick Turn Nexus 450 The exact variant (M / MY) and whether it has live tooling and a Y axis.
02 Mazak Quick Turn 400ML Smooth G The actual turning length (long-bed variant) and the maximum turning diameter.
03 Mazak Quick Turn 300M MODEL AMBIGUITY: QTN-300M (12″ chuck, live tooling, 12-station turret) versus the older QT-300 (10″ chuck, 30 hp, 16-station turret, no live tooling). To be confirmed before publication.
04 Mazak Quick Turn 150M Spindle power and chuck size could not be verified. The exact generation of the machine.
05 Haas SL-30 Standard variant, or the “Big Bore” / long-bed version (distance between centres ≈991 mm)?
06 Haas VF-2 Taking the official Haas positioning and repeatability figures from the datasheet.
07 Proth PSGS 50100AHR The exact model of the surface grinder: the client description says PSGS 50100AHR, the earlier data said PSGC-50100AHR, from a dealer listing. To be confirmed against the machine plate — one letter changes the model.
08 Novick AR65-MA Confirmation that the machine on site is the AR65-MA variant.
09 HOKER The manufacturer, model, usable hearth dimensions and actual temperature range of the two furnaces.
10 ZEISS CONTURA The measuring volume and probe type of the ZEISS CONTURA. Make and model are confirmed by the client; the figures have not been supplied yet.
11 TESA MICRO-HITE 3D The measuring volume of the TESA MICRO-HITE 3D. Make and model are confirmed by the client.

Does your part fit our park?

Enter a diameter and a length. We will show you which machines can cut it.

Send us your drawing

Machine park

How deep the machine park runs

Why depth matters more than the peak

Why the chart stops at the ceiling

No published envelope

What we are still confirming

Does your part fit our park?